|
CLICK HERE to download a printed PDF version of the changes with illustrations and revised pattern piece!
PROJECT ONE: THE ARTS AND CRAFTS TOTE
FABRIC OUTLINE
-Fabric #1
1 1/2 YARDS MEDIUM
TO HEAVYWEIGHT SOLID FABRIC
Exterior of the Bag
-Main Panel - Cut 2 using the pattern piece
-Side Panels - Cut 2 18" long x 7" wide
-Bottom Panel - Cut 1 15" long x 7" wide
Lining for the Bag
-Main Panel - Cut 2 using the pattern piece
-Side Panels - Cut 2 18" long x 7" wide
-Bottom Panel - Cut 1 15" long x 7" wide
-Fabric #2
1 1/4 YARDS MID WEIGHT LARGE FLORAL PRINT
-Tool Holder Back Panel - Cut 1 9 1/2" long x 15" wide
-Tool Holder Foldout Panels - Cut 2 9" long x 15" wide
-Tool Holder Foldout Pocket - Cut 1 9" long x 14" wide
-Front Top Pocket Piece - Cut 1 9" long x 7" wide
-Back Top Pocket Piece - Cut 1 - 6" long x 7" wide
-Back Outer Pocket Panel - Cut 2 10" long x 15" wide
-Handles (top) - Cut 2 3" wide x 36" long
-Fabric #3
1 1/4 YARDS MID WEIGHT MEDIUM FLORAL PRINT
-Tool holder Flap - Cut 2 using pattern piece provided
-Back Inner Pocket Panel - Cut 1 12" long x 15" wide
-Handles (bottom) - Cut 2 3" wide x 36" long
-Fabric #4
1/2 YARD SECOND FLORAL PRINT
-Side Pocket Flaps - Cut 4 using the pattern piece provided
-Front Top Pocket Flaps - Cut 2 using the pattern piece provided
-Back Top Pocket Flaps - Cut 2 using the pattern piece provided
-Pin Keeper Panels - Cut 2 5 1/2" long x 6" wide
-Fabric #5
1/3 YARD OF A SMALL PRINT
-Side Pocket Panels - Cut 2 11 1/2" long x 7" wide
IN ADDITION
Please make these adjustments on your pattern. We have fine tuned the pattern to make it easier for you to use.
·In Step 3C it should say:
Repeat Steps 3A and 3B for the Back Main Panel.
·In Step 4E it should say:
Place the Velcro 3/4" down from the finished edge.
·In Step 7B the Illustration shows a 6" ribbon
PLEASE NOTE: The ribbon should be 7". Also, the ribbon in Step 7E should be 7".
PROJECT TWO: The Needle Case
·In Step 1 where the instructions give dimensions for these pattern pieces.
PLEASE follow these UPDATED INSTRUCTIONS below.
-Outside Panel- 14" wide x 17 1/2" long
-Inside Panel 14" wide x 17 1/2" long
-Inside Pocket 14" wide x 17" long
·Step 2
FIRST PRESS AND THEN CUT ALL OF THE PARTS OUT FOR YOUR NEEDLE CASE
For the exterior of the case Floral Fabric
-Cut 1 Outside Panel 14" wide x 17 1/2" long
-Cut 1 Flap (pattern)
For the inside of the case Mid to Heavyweight Stripe
-Cut 1 Inside Pocket 14" wide x 17" long
-Cut 1 Inside Panel 14" wide x 17 1/2" long
-Cut 1 Flap lining (pattern)
Batting or Interfacing
-Cut 1 piece 14" wide x 17 1/2" long
|
